Make Easier

1. Choose your fabric very carefully. Make sure it does not have a stain resistant finish. If you can pre-wash your fabric, you will be sure that it is clean of any surface treatment that will keep the paint from adhering. Do not use fabric softener. For your first project, try to avoid any soft or floaty fabric that will be difficult to keep straight. The color of the fabric will affect the color of the paint so try to avoid dark colors, unless you want that "velvet Elvis" look!

2. Prepare and gather your supplies.

• To cut your own stencil from acetate, you will need a drawing or photocopy of a design, a sheet of glass and a small, sharp matte knife like an Exacto™ blade.
• To paint with a custom or purchased stencil, you will need textile paints, specifically designed to be both washable and dry cleanable. These paints will need to dry for 24 hours and be heat set. Nontoxic water-based textile paints are commonly available at crafts stores.
• If you are adapting a design, make sure it will work as a stencil. Take time to plan how you will cut and try to plan only one overlay. If you have complex interlocking lines, you will need at least two stencil overlays, which will require careful pattern matching.

3. Tape the original to the glass with the design facing down. Turn over the glass so that you can see the design and tape the plastic to the glass over the design.

4. Carefully cut out the stencil, following the lines of the original. You will probably find that it is easier to cut accurately if you pull the blade slowly towards you. Turn the glass as necessary. If you make a mistake, you can repair it with a small piece of masking tape.

5. Lay out your paint colors on the palette. Do not thin the paint unless it is very, very thick - watery paint will bleed under your stencil edges. If you want pale colors, add white or use a very dry, transparent stenciling technique.

6. Test the colors and practice your painting on a piece of fabric. Make sure your brush is evenly covered with paint but do not load it. A loaded brush will spread paint under the edges of the stencil. Your goal is a nice, even dry brush technique with color that is smooth but not thick.

7. Apply the paint with a gentle pounding motion, holding the brush straight up and down. Do not use a stroking motion. Again, this will keep the paint from seeping under the edges of the stencil. If your design has delicate bits that seem to be lifting as you paint, use an awl or chopstick OR even masking tape/ sellotape to hold them down as you paint.

8. Paint all the colors in your design before lifting the stencil - once it has been moved, it is almost impossible to replace it exactly in the same spot.

9. When you are finished, lift the stencil carefully. The paint should be dry to the touch, but let it dry for 24 hours.

10. After 24 hours, iron your fabric on the back to set the color, using the hottest possible setting.

Materials:

1. Your favorite paint brushes
2. Apple Cider Vinegar
3. Paper towels
4. Your choice of glassware (wine glass, shot glass, globe, etc...)
5. bowl with water (for rinsing out your brushes
6. Glass Paint (Delta Cream Decor Air-Dry Satin Finish Perm Enamel - for tile, glass & ceramics)
   

Making:

The first step is to make sure your glassware is clean and free of foreign objects. Take the vinegar and put a little on the paper towel. Wipe off your glassware with the vinegar. Allow the glass to completely dry. When the glassware is dry hand wash it under warm soapy water. This will prepare your glass for painting. You may dry your glass off and get ready to paint.Now that your glass is clean you can begin painting. Take your paint and you may begin painting the design that you want. When painting on glass you have to be patient and know that it will take several coats of paint to get the best look. Do not try to apply a lot of paint at one time. It is best to use a small amount of paint, let that dry, then apply another coat. Depending on what color you are using will depend on how many times you need to apply. Lighter colors will usually take more coats than darker colors. Using the correct brush will help make your design process a little easier. There are different types of paint brushes. A round brush works well when painting circles. A linear brush works well when painting any type of lines. When painting small dots try using a cutip!After you have finished your glass let it sit for at least 24 hours. After the 24 hours is over set your oven to 350 degrees and bake the glass for 30 minutes. This will make the paint stick. Your glass is now dishwasher safe; however, I usually still hand-wash my glasses. Hope this helps!